Showermate Universal 2.6 Bar Single Pump

Showermate Universal Single pumps can be used in pairs to pump hot and cold water supplies independently, or as a single pump to boost a water supply as required.

Universal pumps do not require a gravity flow of water to start.

Suitable for both positive and negative head applications. Suitable for domestic use only, Showermate Universal pumps are suitable for installation into open vented hot and cold water systems.

Application

Boost the water pressure in either the hot or cold supply
Suitable for single or multiple (up to 4) outlets within a bathroom subject to correct specification and pump sizing.

Highlights

Quiet Operation (From 52dB(A))

CE Marked
WRAS Approved

Compare product +

Additional information

Brand	Stuart Turner
Standard/Universal Pump	Universal
Single/Twin Pumps	Single
Highlights	Quiet Operation (From 52dB(A))
Approval	CE Marked, WRAS Approved
Warranty	3 year warranty

Additional information

Brand	Stuart Turner
Standard/Universal Pump	Universal
Single/Twin Pumps	Single
Highlights	Quiet Operation (From 52dB(A))
Approval	CE Marked, WRAS Approved
Warranty	3 year warranty

Reviews

There are no reviews yet.

Be the first to review “Showermate Universal 2.6 Bar Single Pump”

General

Product code 46534
Guarantee 3 years
WRAS approval 1212078

Features

Pump type Peripheral
Mechanical seal EPDM / PTFE / Al. Oxide
Anti vibration feet
Flexible hoses 2
Run on timer 3 sec
Dry run protection

Materials

Pump body Plastic
Impeller Plastic

Performance

Maximum head (closed valve) 2.6 bar
Performance @ 9 l/min 1.3 bar
Performance @ 18 l/min 0.3 bar
Maximum flow 18 l/min
Maximum static inlet pressure 6 metres
Maximum static outlet pressure 6 metres
Maximum working pressure* 380 kPa (3.8 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity (approx) 0.8 l/min
Pressure vessel air pre-charge 1.5 bar (21.75 psi)

Connections

Pump connections G ¾ male

Flexible hoses

Connections G ¾ female x 15 mm push-in
200 mm long
Isolating valves on inlet hoses

Motor

Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 9 l/min and above

Electrical

Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 1.2 Amps
Power consumption 280 Watts
Fuse rating 5 Amps
Power cable (pre-wired) 1.5 metres

Physical

Enclosure protection IP22
Length 233 mm
Width 163 mm
Height (excluding hoses) 373 mm
Weight (including fittings) 4.7 Kg

* The maximum pressure that can be applied to the pump under any installation conditions.

** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.