Monsoon Universal 1.5 Bar Twin Pumps

General

• Product code 46505
• Guarantee 5 years
• WRAS approval 1404701

Features

• Pump type Peripheral
• Mechanical seal EPDM / PTFE / Al. Oxide
• Anti vibration feet
• Inlet strainer(s)
• Flexible hoses 4
• Run on timer 3 sec
• Dry run protection

Materials

• Pump body Brass
• Impeller Brass

Performance

• Maximum head (closed valve) 1.5 bar
• Performance @ 9 l/min 1.3 bar
• Performance @ 18 l/min 0.8 bar
• Maximum flow 32 l/min
• Maximum static inlet pressure 8 metres
• Maximum static outlet pressure 8 metres
• Maximum working pressure* 600 kPa (6 bar)
• Maximum ambient air temperature 40 °C
• Min / Max water temperature** Min 4 °C / Max 65 °C
• Flow switch sensitivity (approx) 0.6 l/min
• Pressure vessel air pre-charge 0.9 bar (13 psi)

Connections

• Pump connections G ¾ male
• Flexible hoses
• Connections (UK model) G ¾ female x 22 mm push-in
• 300 mm long
• Isolating valves on all hoses
• Connections (ROI model) G ¾ female x 21 mm push-in
• 300 mm long
• Isolating valves on all hoses
• Connections (Export model) G ¾ female x G ¾ female
• 300 mm long

Motor

• Type Induction, auto-reset thermal trip
• Duty rating Continuous (S1) @ 9 l/min and above***

Electrical

• Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
• Current (full load) 1.5 Amps
• Power consumption 355 Watts
• Fuse rating 5 Amps
• Power cable (pre-wired) 1.5 metres

Physical

• Enclosure protection IPX4
• Length 265 mm
• Width 162 mm
• Height (excluding hoses) 243 mm
• Weight (including fittings) 8.8 Kg

* The maximum pressure that can be applied to the pump under any installation conditions.

** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.

*** Both heads pumping 4.5 l/min and above.