Showermate TP Standard 2.0 Bar Single Pump

The Showermate TP Standard Single pumps are designed to improve hot or cold water supplies to single taps or to pump blended water from a shower mixer.

This pump requires a gravity flow of 0.8 litres per minute to start and is suitable for positive head applications only.

Highlights

Quiet Operation (From 56dB(A))

CE Marked
WRAS Approved

Compare product +

SKU: 49086 Categories: Shower Pumps, Stuart Turner Pumps

Additional information

Brand	Stuart Turner
Standard/Universal Pump	Standard
Single/Twin Pumps	Single
Highlights	Quiet Operation (From 56dB(A))
Approval	CE Marked, WRAS Approved
Warranty	1 year warranty

Additional information

Brand	Stuart Turner
Standard/Universal Pump	Standard
Single/Twin Pumps	Single
Highlights	Quiet Operation (From 56dB(A))
Approval	CE Marked, WRAS Approved
Warranty	1 year warranty

Reviews

There are no reviews yet.

Be the first to review “Showermate TP Standard 2.0 Bar Single Pump”

General

Product code 49086
Guarantee 1 year
WRAS approval 1506334

Features

Pump type Centrifugal
Mechanical seal Nitrile / Carbon / Silicon Carbide
Anti vibration feet
Inlet strainer(s)
Flexible hoses 2
Dry run protection

Performance

Maximum head (closed valve) 2.0 bar
Performance @ 9 l/min 1.0 bar
Performance @ 18 l/min 0.1 bar
Maximum flow 17 l/min
Maximum static inlet pressure 10 metres
Maximum working pressure* 300 kPa (3 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity (approx) 0.8 l/min

Connections

Pump connections G ¾ male

Flexible hoses

Connections G ¾ female x 15 mm push-in
200 mm long
Motor
Type Series wound, manual reset thermal trip
Duty rating Intermittent, (S3) 30 mins on/30 mins off @ 9 l/min

Electrical

Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 1.0 Amps
Power consumption 180 Watts
Fuse rating 3 Amps
Power cable (pre-wired) 1.5 metres

Physical

Enclosure protection IPX2
Length 228 mm
Width 97 mm
Height (excluding hoses) 152 mm
Weight (including fittings) 2.2 Kg

* The maximum pressure that can be applied to the pump under any installation conditions.

** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.