Showermate Universal 2.6 Bar Twin Pump

Showermate Universal 2.6 Bar Twin pumps are designed to boost the incoming hot and cold water supply to a shower, bath, shower mixer or mixer tap.

Universal pumps do not require a gravity flow of water to start.

Suitable for both positive and negative head applications. Suitable for domestic use only, Showermate universal pumps are suitable for installation into open vented hot and cold water systems.

Application

Boost hot and cold water supplies equally
Suitable for single or multiple (up to 4) outlets within a bathroom subject to correct specification and pump sizing

Highlights

  • Quiet Operation (From 52dB(A))
  • CE Marked
  • WRAS Approved

Additional information

Brand
Standard/Universal Pump

Universal

Single/Twin Pumps

Twin

Highlights

Quiet Operation (From 52dB(A))

Approval

CE Marked, WRAS Approved

Warranty

3 year warranty

Additional information

Brand
Standard/Universal Pump

Universal

Single/Twin Pumps

Twin

Highlights

Quiet Operation (From 52dB(A))

Approval

CE Marked, WRAS Approved

Warranty

3 year warranty

Reviews

There are no reviews yet.

Be the first to review “Showermate Universal 2.6 Bar Twin Pump”

Your email address will not be published. Required fields are marked *

General

  • Product code 46533
  • Guarantee 3 years
  • WRAS approval 1212078

Features

  • Pump type Peripheral
  • Mechanical seal EPDM / PTFE / Al. Oxide
  • Anti vibration feet
  • Flexible hoses 4
  • Run on timer 3 sec
  • Dry run protection

Materials

  • Pump body Plastic
  • Impeller Plastic

Performance

  • Maximum head (closed valve) 2.6 bar
  • Performance @ 9 l/min 2.0 bar
  • Performance @ 18 l/min 1.3 bar
  • Maximum flow 36 l/min
  • Maximum static inlet pressure 6 metres
  • Maximum static outlet pressure 6 metres
  • Maximum working pressure* 380 kPa (3.8 bar)
  • Maximum ambient air temperature 40 °C
  • Min / Max water temperature** Min 4 °C / Max 65 °C
  • Flow switch sensitivity (approx) 0.8 l/min
  • Pressure vessel air pre-charge 1.5 bar (21.75 psi)

Connections

  • Pump connections G ¾ male

Flexible hoses

  • Connections G ¾ female x 15 mm push-in
  • 200 mm long
  • Isolating valves on inlet hoses

Motor

  • Type Induction, auto-reset thermal trip
  • Duty rating Continuous (S1) @ 9 l/min and above***

Electrical

  • Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
  • Current (full load) 2.5 Amps
  • Power consumption 610 Watts
  • Fuse rating 5 Amps
  • Power cable (pre-wired) 1.5 metres

Physical

  • Enclosure protection IP22
  • Length 320 mm
  • Width 163 mm
  • Height (excluding hoses) 373 mm
  • Weight (including fittings) 6.4 Kg

* The maximum pressure that can be applied to the pump under any installation conditions.

** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.

*** Both heads pumping 4.5 l/min and above.

Dimensions

https://www.stuart-turner.co.uk/media/149763-Dimension-Showermate-Universal-Twin.pdf

Performance

https://www.stuart-turner.co.uk/media/149770-Performance-Showermate-Universal-Twins.pdf

Datasheet

https://www.stuart-turner.co.uk/media/149790-Showermate-Universal-Twin-BathShowerPump-DS.pdf

Brochure

https://www.stuart-turner.co.uk/media/128917-Brochure-Showermate-Section.pdf

Installation Manual

https://www.stuart-turner.co.uk/media/149786-Showermate-Universal-Single-and-Twin-BathShowerPump-IG.pdf

Vented Systems Explained

https://www.stuart-turner.co.uk/media/136776-Vented_Systems_Explained.pdf

Vented Systems Pump Application Guide

https://www.stuart-turner.co.uk/media/398598-Vented_Systems_Pump_Application_Guide.pdf

0
X