Monsoon Standard 3.0 Bar Single Pump (Positive)

360.24 inc. VAT

Monsoon Standard 3.0 bar Single pumps are ideal for boosting a water supply in vented systems.

Suitable for positive head applications only.

Suitable for domestic use, Monsoon Standard pumps will function under positive head conditions and are suitable for installation into open vented hot and cold water systems. Monsoon Standard pumps require a flow of just 0.6 l/min through the outlet to start.

Application

Boost the water pressure in either the hot or cold water supply in a positive head application.
Boost the blended water outlet between the shower valve and the shower rose.

Highlights

  • Quiet Operation (From 42dB(A))
  • CE Marked
  • WRAS Approved

Installation Options

Install your pump yourself.

Include installation of your pump by one of The Shower Doctors team (price subject to site survey)

Product price: 360.24 inc. VAT
Total options:
Order total:
Compare product +

Additional information

Brand

Standard/Universal Pump

Standard

Single/Twin Pumps

Single

Highlights

Quiet Operation (From 42dB(A))

Approval

CE Marked, WRAS Approved

Warranty

5 year warranty

Additional information

Brand

Standard/Universal Pump

Standard

Single/Twin Pumps

Single

Highlights

Quiet Operation (From 42dB(A))

Approval

CE Marked, WRAS Approved

Warranty

5 year warranty

Reviews

There are no reviews yet.

Be the first to review “Monsoon Standard 3.0 Bar Single Pump (Positive)”

Your email address will not be published. Required fields are marked *

General

  • Product code 46419
  • Guarantee 5 years
  • WRAS approval 1404702

Features

  • Pump type Peripheral
  • Mechanical seal EPDM / PTFE / Al. Oxide
  • Anti vibration feet
  • Inlet strainer(s)
  • Flexible hoses 2
  • Dry run protection

Materials

  • Pump body Brass
  • Impeller Brass

Performance

  • Maximum head (closed valve) 3.0 bar
  • Performance @ 9 l/min 2.5 bar
  • Performance @ 18 l/min 1.6 bar
  • Maximum flow 33 l/min
  • Maximum static inlet pressure 14 metres
  • Maximum working pressure* 600 kPa (6 bar)
  • Maximum ambient air temperature 40 °C
  • Min / Max water temperature** Min 4 °C / Max 65 °C
  • Flow switch sensitivity (approx) 0.6 l/min

Connections

  • Pump connections G ¾ male
  • Flexible hoses
  • Connections (UK model) G ¾ female x 22 mm push-in
  • 300 mm long
  • Isolating valves on all hoses
  • Connections (ROI model) G ¾ female x 21 mm push-in
  • 300 mm long
  • Isolating valves on all hoses
  • Connections (Export model) G ¾ female x G ¾ female
  • 300 mm long

Motor

  • Type Induction, auto-reset thermal trip
  • Duty rating Continuous (S1) @ 9 l/min and above

Electrical

  • Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
  • Current (full load) 1.7 Amps
  • Power consumption 385 Watts
  • Fuse rating 5 Amps
  • Power cable (pre-wired) 1.5 metres

Physical

  • Enclosure protection IPX4
  • Length 200 mm
  • Width 126 mm
  • Height (excluding hoses) 202 mm
  • Weight (including fittings) 5.4 Kg

* The maximum pressure that can be applied to the pump under any installation conditions.

** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.

Dimensions

https://www.stuart-turner.co.uk/media/5187-Dimension-Monsoon-Standard-Single.pdf

Performance

https://www.stuart-turner.co.uk/media/5185-Performance-Monsoon-Standard-Singles.pdf

Datasheet

https://www.stuart-turner.co.uk/media/13217-Monsoon-Standard-Single-ShowerPump-WholeHousePump-DS.pdf

Brochure

https://www.stuart-turner.co.uk/media/128914-Brochure-Monsoon-Section.pdf

Installation Manual

https://www.stuart-turner.co.uk/media/5191-Monsoon-Standard-Single-and-Twin-ShowerPump-WholeHousePump-IG.pdf

Vented Systems Explained

https://www.stuart-turner.co.uk/media/136776-Vented_Systems_Explained.pdf

Vented Systems Pump Application Guide

https://www.stuart-turner.co.uk/media/398598-Vented_Systems_Pump_Application_Guide.pdf

0
X